By joining you will help ensure that we can continue to provide this service
JOIN HERE!
professional /2 engine rebuild
professional /2 engine rebuild
Heads need rebuilt and gaskets are leaking now that its been running regularly. Its time for professional help. I dont trust myself in there.
My dream plan was to get it to Benchmark to get a full mechanical restoration, or at least engine rebuild but I unfortunately missed that boat and haven't figured out where I can get help to get this done correctly. Love my kids, but boy do they get in the way of my priorities
Looking for any references to a shop or individual who can sort out motor & transmission so they are good for another 20+ years. Im in central Texas between Austin/SanAntonio but realize Ill probably need to take it out of state. Not opposed to pulling the motor and shipping but will likely drag it there myself.
thanks
Terry
- schrader7032
- Posts: 9056
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: professional /2 engine rebuild
From my '69 R69S, I "dragged" the engine minus the outside stuff to Dave Clark's shop in Pacific, MO. His shop is Endeavor BMW. Dave cut his teeth on /2 bikes back in the day and does good work. That would be my recommendation.
https://www.abcbmw.com/
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 62
- Joined: Fri Oct 27, 2006 3:00 am
-
- Posts: 141
- Joined: Fri Oct 27, 2006 3:00 am