By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R50/2 149-150 Carbs fouling plugs, put 105's in and seems fine...but is it?
Re: R50/2 149-150 Carbs fouling plugs, put 105's in and seems fine...but is it?
Dave
-
- Posts: 19
- Joined: Sun Dec 26, 2021 2:59 am
Re: R50/2 149-150 Carbs fouling plugs, put 105's in and seems fine...but is it?
The floats seem to be ok, I had them floating in a container of fuel for a week and no leaks(one did but i patched it with solderlene, still 7grams)
I have 2 sets of carbs(one for the finished R50/2 the others are for the R60, in the process of being built,) One carb had the lever top ,i have bought another lever top, so one set will be lever top and the other ,the long float needle type.
I will be replacing all 4 of the carbs needle jets, min jets and the pilot jets.
The carbs all have the identical numbers,149-150, so will be fitting them with 120's as the 120's i have are bigger afaik(caused the fouling)
The 105's i have drilled to 1.15 are temporary, but in doing so i have a ridable bike , so it is definitely a leading cause of the plug fouling
Guys , thanks again for the help...getting there
-
- Posts: 1293
- Joined: Wed Aug 05, 2009 9:06 pm
- Has thanked: 19 times
- Been thanked: 17 times
Re: R50/2 149-150 Carbs fouling plugs, put 105's in and seems fine...but is it?
R69S - R60/2 - R67/2 - R51/3 - R69