By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R69 no spark
Re: R69 no spark
- therealkennyboy
- Posts: 93
- Joined: Sat Apr 02, 2022 5:44 pm
- Location: Scottsdale, Arizona
- Has thanked: 1 time
- Been thanked: 1 time
Re: R69 no spark
On your (old Bench Mark Works) site, you list the tool for pulling the magneto (and generator rotor as well?), which I understand is a hardened bolt with a portion of the front thread relieved in diameter; you list a lot of other specialty tools as well.
I see no such tools listed on the Max site; did you actually have those tools in stock that Max took but simply haven't listed on their site yet, or did you get them from some other vendor when an order was placed? Does one need to contact Max directly rather than order thru their on-line parts system?
Scottsdale, AZ, USA
1960 R60 (currently), 1974 R75/6 (past), 1981 R100CS (currently), 1984 R100RS (past), 1989 K100RS (past)
- schrader7032
- Posts: 9040
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 2 times
- Been thanked: 34 times
Re: R69 no spark
tool004 -- Special Order generator rotor/magneto puller bolt Matra 5030
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- vechorik1373
- Posts: 265
- Joined: Fri Oct 27, 2006 3:00 am
- Been thanked: 22 times
Re: R69 no spark
The tool for removing both the armature and the rotating magnet is available, and my old web site is still active, but I just went to my old web site, and they say special order?!??? I had a LOT of them in stock. I cannot believe they have run out of them and have not re ordered them. Give MAX BMW a call, and ask. They are bound to have some in stock, still.
tool004 -- $0.00 Special Order generator rotor/magneto puller bolt Matra 5030
Technical Adviser, Former owner, Bench Mark Works
662 312 2838 cell 9 am to 4pm CST PLEASE!
- wa1nca
- Posts: 1228
- Joined: Thu Sep 27, 2012 5:15 pm
- Location: Ashfield Ma
- Has thanked: 10 times
- Been thanked: 17 times
Re: R69 no spark
http://vintagebeemerparts.com/new-vinta ... oval-tool/
tommy
54 R51/3, 55 R50/Velorex 560 sidecar, 64 R27, 68 R69US, 75 R75/6
Ashfield, Ma
USA
- vechorik1373
- Posts: 265
- Joined: Fri Oct 27, 2006 3:00 am
- Been thanked: 22 times
Re: R69 no spark
http://motoelekt.com/goodstuff.htm
Call 256-442-8886
Rotor Removal Tool $5.00
Hardened steel replica of factory tool. Essential for removal and replacement of rotor.
Technical Adviser, Former owner, Bench Mark Works
662 312 2838 cell 9 am to 4pm CST PLEASE!
- schrader7032
- Posts: 9040
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 2 times
- Been thanked: 34 times
Re: R69 no spark
https://shop.maxbmw.com/fiche/PartsDeta ... %203%20600
It says it doesn't fit pre 1970 bikes, but it's a starting point for discussion if you give them a call. According to Dan Neiner's Cycleworks site, the rotor puller bolt works on all twins from 1951 to 1995.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: R69 no spark
- schrader7032
- Posts: 9040
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 2 times
- Been thanked: 34 times
Re: R69 no spark
Hmmm...the more I think about that, it's not going to help. But points must actually open and close.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.