By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R69S mufflers
-
- Posts: 166
- Joined: Thu Sep 20, 2012 11:37 am
R69S mufflers
I understand the diameter of the R69S is a bit larger, can someone tell me what that diameter is?
Who manufactures/sells the best quality (original looking) mufflers for an R69S right now?
thanks,
Scott
- schrader7032
- Posts: 9053
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Re: R69S mufflers
viewtopic.php?f=7&t=17119
Salis seems to get a vote of confidence.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: R69S mufflers
Also you may need to change the jetting.
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York
Re: R69S mufflers
I don't know where you are, but I put a nasty dent in one of my mufflers and would being interested in the 90mm silencers you would be removing.
Thank you
Don
All on the road, going no where in particular in the Finger Lakes of New York
Re: R69S mufflers
Dave
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: R69S mufflers
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York
-
- Posts: 149
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 2 times
- Been thanked: 9 times
Re: R69S mufflers
Thanks.
Chuck S.
Chuck S
- miller6997
- Posts: 1185
- Joined: Fri Oct 27, 2006 3:00 am
Re: R69S mufflers
'67 R69S
'13 F800GT
Altadena, California
-
- Posts: 149
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 2 times
- Been thanked: 9 times
Re: R69S mufflers
I believe the Keihan 38mm inlet mufflers you refer to are specifically for the conversion bikes I referenced above. Thanks for the link though. I may need a pair for a conversion project I will be starting soon
Chuck S.
Chuck S