If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!

R60/2 Question on rocker arm movement.

xackley
Posts: 111
Joined: Sat Oct 14, 2006 4:09 pm
Been thanked: 2 times

Re: R60/2 Question on rocker arm movement.

Post by xackley »

slop in the rockers has nothing to do with the quality of the heads. The rocker is worn out. Simply replace it.
1958 R69, 1972 R75/5, 1980 XS650, 1982 GL1100, 2003 guzzi ev, 2017 guzzi V7!!!
All on the road, going no where in particular in the Finger Lakes of New York

Daves79x
Posts: 680
Joined: Sun Aug 09, 2015 8:13 pm
Location: Knox, PA. USA
Been thanked: 2 times

Re: R60/2 Question on rocker arm movement.

Post by Daves79x »

Scottie, for one, supposedly has a fix for the butterheads. Likely not a cheap one, but a fix nonetheless.

Dave
Dave

Kurt V
Posts: 59
Joined: Thu Oct 15, 2020 9:13 am
Location: Lincoln, NE

Re: R60/2 Question on rocker arm movement.

Post by Kurt V »

Dave, I’m not sure who Scottie is. Can you give me a link?
Kurt V
R60/2, R65 LS
1973 Norton 850, 1973 RD 350

User avatar
schrader7032
Posts: 9016
Joined: Fri Oct 27, 2006 3:00 am
Location: San Antonio, TX
Has thanked: 2 times
Been thanked: 29 times

Re: R60/2 Question on rocker arm movement.

Post by schrader7032 »

Just google "Scotties Workshop". He's a contributor here on the forum. Or go to the Knowledge Base in the upper right and then to Useful Links. Scottie's info is on Page 8.
Kurt in S.A.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.

Post Reply