poor compression

Daves79x
Posts: 489
Joined: Sun Aug 09, 2015 8:13 pm
Location: Knox, PA. USA

Re: poor compression

Post by Daves79x »

Hate to disagree, but neither of my two recent bore jobs (R50 and R69) had 'taper'. Both bike had great compression from the get-go and the rings seated perfectly very quickly. Others obviously have different experiences. My R50 cylinders were bored to .0025 clearance and the R69 cylinders were bored to .0030.

Dave
Dave

dellatorre6708
Posts: 15
Joined: Fri Oct 27, 2006 3:00 am

Re: poor compression

Post by dellatorre6708 »

Thanks for all the replies and suggestions. Haven't had time to ride lately.
Frank.
NYC.
Frank,
NYC

Post Reply