Some time ago I managed to borrow some original R51/3 workshop wall hangings . There are 4 in total . Front wheel , Rear cardan drive , Engine and gearbox The originals were 820mm by 570 mm.
Just came across them again.
Make a super workshop or den block mounted wall hanging.File size around 10 MB
If there is any interest I can post them for uploading.
Due to the large file size will have to make 4 downloads.
Let me know.
Bill
South Africa
If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R51/3 Workshop wall hangings
-
speight1823
- Posts: 142
- Joined: Fri Oct 27, 2006 3:00 am
While that drawing would be
While that drawing would be simple with today's CAD, I cannot fathom the talent it took to draw them by hand.
Very impressive, I'd like to have them all.
Mike
Very impressive, I'd like to have them all.
Mike
67 R50/2 w/R100 engine/trans and Ural Sidecar
69 R60/2 76 R90S 78 R100RS
70 Triumph w/Spirit Eagle Sidecar
69 R60/2 76 R90S 78 R100RS
70 Triumph w/Spirit Eagle Sidecar
-
The Plunger
- Posts: 269
- Joined: Mon Sep 03, 2012 8:48 am
- Location: West Des Moines, Iowa
I believe Mike Dunn of
I believe Mike Dunn of Vintage German Motorcycles was selling high quality repops not long ago.
Brian
59-69
59-69
-
speight1823
- Posts: 142
- Joined: Fri Oct 27, 2006 3:00 am
R51/3 Engine
R51/3 Engine . Workshop wall hanging. Due to large file size each one has to have its own post.
Ask your local photo copy shop to make as large as possible without blurring. At 820mm by 570mm should still be very clear.Mine were printed this size .
If you are going to block mount Get printed on water proof paper so you can wipe off dust.
Bill
Ask your local photo copy shop to make as large as possible without blurring. At 820mm by 570mm should still be very clear.Mine were printed this size .
If you are going to block mount Get printed on water proof paper so you can wipe off dust.
Bill
- Attachments
-
- r51-3_engine.jpg (10.68 MiB) Viewed 2208 times
-
speight1823
- Posts: 142
- Joined: Fri Oct 27, 2006 3:00 am
-
speight1823
- Posts: 142
- Joined: Fri Oct 27, 2006 3:00 am
I bought a set. Yes, from
I bought a set. Yes, from Mike Dunn. He was selling them here and I think on BMWMOA.
Beautiful graphics and even more so framed.
- Attachments
-
- img_7107.jpg (232.6 KiB) Viewed 2208 times
-
- img_7104.jpg (280.28 KiB) Viewed 2208 times
-
- img_7103.jpg (174.63 KiB) Viewed 2208 times
-
- img_7102.jpg (165.63 KiB) Viewed 2208 times
mike wex/stagewex
1969 BMW r60/2, US Model, 1995 BMW K75, 2006 Yamaha TW200, 2007 Ural Patrol, 1991 Honda XR250L
1969 BMW r60/2, US Model, 1995 BMW K75, 2006 Yamaha TW200, 2007 Ural Patrol, 1991 Honda XR250L