By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Available /2 Enduro Saddlebag Mounting Brackets
-
- Posts: 3
- Joined: Sun Sep 24, 2017 9:03 pm
Enduro Bag Brackets
Please send any ordering and any other pertinent information you can to me about your Enduro Bag Brackets.
Thanks,
Doug
-
- Posts: 3
- Joined: Sun Sep 24, 2017 9:03 pm
- oldtimers.si
- Posts: 133
- Joined: Mon Aug 18, 2014 11:00 am
Enduro Bag Brackets
send me picture of your bags and i will help with brackets - holders
regards,Mec
- oldtimers.si
- Posts: 133
- Joined: Mon Aug 18, 2014 11:00 am
pin striping decals to the Enduro bags
hi, Chuck
yes , we have in stock black or white
for enduro and for our oldtimers bags
next week we add to our pricelist
regards,Mec
- Attachments
-
- pin_strip_lines_white.jpg (1.96 MiB) Viewed 2416 times
-
- pin_strip_lines_white_1.jpg (30.61 KiB) Viewed 2416 times
-
- pin_strip_lines_black.jpg (68.98 KiB) Viewed 2416 times
-
- pin_strip_lines_black_1.jpg (633.64 KiB) Viewed 2416 times
mounts
yes , we have in stock black or white
for enduro and for our oldtimers bags
next week we add to our pricelist
regards,Mec
Hello Mec,
Im ready to order mounts for my old original Enduro bags. Im interested in black mounts and Id like to mount them inside the rear fender. Do you still have them? My email is skychsva@aol.com
thanks
chuck
- oldtimers.si
- Posts: 133
- Joined: Mon Aug 18, 2014 11:00 am
hi,Skychs holders set -
holders set - inside the rear fender we have only some prototyps is not good , too small space for uninstall bags
better is inox holders for outside fixing , you can repaint to Black
regards,Mec
happy new year for all
- Attachments
-
- christmass_bags_large.jpg (700.53 KiB) Viewed 2416 times
Enduro Mounts
I was able to get the OldTimers brackets mounted on the inside of the rear fender. I had to make it work because I didn't want the look of the brackets on the outside.
I had to modify the inside plates to conform to the inside of the bags. It took several trips to the grinder to get them right but eventually everything fell into place. I also used wing nuts on the top for easy removal.
If Oldtimers could extend the last bend in the brackets to make up for the position I think it would be a perfect fit.
- Attachments
-
- fullsizeoutput_1978.jpeg (1.52 MiB) Viewed 2416 times
-
- fullsizeoutput_1977.jpeg (1.59 MiB) Viewed 2416 times
-
- fullsizeoutput_1976.jpeg (1.87 MiB) Viewed 2416 times
-
- wkdyv2bwqf6t2ctaj0jadg.jpg (1.59 MiB) Viewed 2416 times
-
- qkbots2jsqq9eeynru31g.jpg (1.43 MiB) Viewed 2416 times
tire
PS
Dont forget to put air in the rear tire
Tommy
Ha. Ha. I promise. The rear tire is off for a new set of wheel bearings. You guys spot everything don't you?