Page 4 of 29
Pictures from previous post
Posted: Tue Apr 10, 2018 12:11 am
by San Arthur
Frame
Rear Fender holder
Foot peg mount 1
Foot peg mount 2
Fender mount 2
Nor I...
Posted: Tue Apr 10, 2018 1:08 am
by miller6997
Your pictures are just not coming through. I use the 'Insert image' tab that you see at the far left of the text box, just under the Comment: label.It always seems to work for me.
I can...
Posted: Tue Apr 10, 2018 5:23 pm
by flr69s
I can see clearly now 5 pictures... I could not in the earlier post. This is on my Samsung smartphone, could not check on my desktop PC yet.
Best regards,
Frank
Frame neck dent.
Posted: Tue Apr 10, 2018 9:14 pm
by San Arthur
I notice a dent in the frame neck, you think this will interfere with the fork?
Should I fix it, it has never bother me in the past.
Franken-Fenders, help.
Posted: Tue Apr 10, 2018 9:31 pm
by San Arthur
After Jim worked with the fenders in the blasting cabinet we discover some led, copper and metal patches.
As I mentioned before poor Zenaida had a hard life.
Bondo is a magic think, isn´t it?
The hole is 3/8 thick, the patch makes the fender super heavy.
The welder and body worker did a great job hiding this.
The front fender is to damaged to save, and rear fender lost it´s shape.
I decided to replace them instead of bondo my way out of it.
Do you have an extra set? Please help me.
Franken-Fenders, help.
Posted: Tue Apr 10, 2018 9:34 pm
by San Arthur
After Jim worked with the fenders in the blasting cabinet we discover some led, copper and metal patches.
As I mentioned before poor Zenaida had a hard life.
Bondo is a magic think, isn´t it?
The hole is 3/8 thick, the patch makes the fender super heavy.
The welder and body-worker did a great job hiding this.
The front fender is too damaged to save, and rear fender lost it´s shape.
I decided to replace them instead of bondo my way out of it.
Do you have an extra set? Please help me.
Look what I found
Posted: Tue Apr 10, 2018 9:39 pm
by San Arthur
This was a latter replacement.
I found a bolt welded in the center stand stay....
Rear fender tab and foot peg mount
Posted: Tue Apr 10, 2018 9:44 pm
by San Arthur
The rear fender tabs and the foot peg mount have been welded.
A small progress!!!
Tank
Posted: Tue Apr 10, 2018 9:47 pm
by San Arthur
The gas tank is ready for painting.
Franken-Fenders.
Posted: Wed Apr 11, 2018 12:07 am
by San Arthur