By joining you will help ensure that we can continue to provide this service
JOIN HERE!
R 35 and maybe R2/3/4 speedo drive
R 35 and maybe R2/3/4 speedo drive
Thanks, Charlie.
Re: R 35 and maybe R2/3/4 speedo drive
The mainshaft would still not come out, so we managed to extract the output bearing but still no joy. Then we drove out the layshaft axle from the clutch side. This allowed those gears to drop, which allowed the mainshaft out. Beware the spacers on both shafts. Maybe the bearing can be left in place if the layshaft is dropped first.
The speedo drive gear has blued, so maybe the temper has been disturbed. There was something on the output bearing, maybe a seal, not present on the inner side, which has burned. Now to see if I can work on the good box without damaging anything.
Charlie.