Page 1 of 1
1939 R51 Missing Sidecar Mounts
Posted: Sun Aug 02, 2020 9:12 pm
by downey3837
I am looking for the two sidecar ball mounts normally welded on the frame.
Someone cut them off to connect a different sidecar.
If you have a damaged frame you have been keeping because you are like me and think it may be of use some day, we could make a deal.
Thank you.
Re: 1939 R51 Missing Sidecar Mounts
Posted: Mon Aug 03, 2020 8:11 am
by Beemer100
Brock,
check out this website. They would have the "balls" ready to weld-on
https://steib-bornowski.de/cart2/index. ... 1_21_57_60
hope, this helps
Klaus
Re: 1939 R51 Missing Sidecar Mounts
Posted: Mon Aug 03, 2020 7:43 pm
by downey3837
Thank you, Klaus.
That was easy!
One step closer to starting the restoration.
Brock
Re: 1939 R51 Missing Sidecar Mounts
Posted: Tue Aug 04, 2020 4:28 pm
by bm68andreas
Re: 1939 R51 Missing Sidecar Mounts
Posted: Tue Aug 04, 2020 5:50 pm
by deyoung2837
Hello Brock,
There should be only one ball welded to the frame.
Picture is my 1938 R51 frame after straightening.
See notes on picture.
Take care,
Lee
Re: 1939 R51 Missing Sidecar Mounts
Posted: Sat Aug 08, 2020 6:30 pm
by downey3837
Hi Lee,
Thank you for the photo. I will put it in my R51 file.
My poor wording, one ball attachment and one bolt attachment.
I will give you a call soon and you can give me a few insights, before I go charging into this venture.
Brock
Re: 1939 R51 Missing Sidecar Mounts
Posted: Sat Aug 08, 2020 6:34 pm
by downey3837
Thank you for the ebay information, bm68andreas
Brock