If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!

B/3 Bosch Dynamo cover

Post Reply
Beemer54
Posts: 62
Joined: Sun Sep 07, 2014 1:07 pm

B/3 Bosch Dynamo cover

Post by Beemer54 »

Does anyone know of a supplier for the end cover of a b/3 dynamo end cover - the cap that goes over the voltage regulator on R5 and R51 models?
I've tried all the usual German suppliers but they say this glorified tin can is unobtainium on its own and can only be bought as part of a new repro dynamo!
Thanks in advance.

User avatar
caker
Posts: 201
Joined: Sat Nov 12, 2011 10:49 pm
Location: Haddonfield, NJ, USA
Has thanked: 1 time
Been thanked: 5 times

They come up on eBay every so

Post by caker »

They come up on eBay every so often.

I believe for the twincam bikes, that you need the version of the cover with the bottom edge rounded out to fit the motor casting. That's my/our suspicion, anyhow...

-Chris

Beemer54
Posts: 62
Joined: Sun Sep 07, 2014 1:07 pm

Bosch dynamo cover

Post by Beemer54 »


I believe for the twincam bikes, that you need the version of the cover with the bottom edge rounded out to fit the motor casting. That's my/our suspicion, anyhow...

-Chris

Yep - that's the one. I've been looking on German Ebay for about a year now but nothing (usable)so far.
Thanks

User avatar
C.K
Posts: 149
Joined: Wed Jan 08, 2014 11:58 am

Hi I thihk I have one spare.i

Post by C.K »

Hi
I thihk I have one spare.i Have to check.

User avatar
C.K
Posts: 149
Joined: Wed Jan 08, 2014 11:58 am

Is this what you are looking

Post by C.K »

Is this what you are looking for?
Attachments
20171217_185612.jpg
20171217_185612.jpg (2.17 MiB) Viewed 2403 times

Beemer54
Posts: 62
Joined: Sun Sep 07, 2014 1:07 pm

Bosch dynamo cover

Post by Beemer54 »

Yes. Thanks for that
but I think I'm sorted now through a different forum. If it comes to nothing I'll be in touch.

Post Reply