By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Progress on R47 .
-
- Posts: 142
- Joined: Fri Oct 27, 2006 3:00 am
Progress on R47 .
Remade rockers from Bohler K110 steel and hardened to 50 RW. Location is via octagonal hole in rocker boss and shaft with a .02 mm interference fit. A 8 mm ht bolt runs through the center . Bearings are standard sealed roller bearings.
I did not make rockers as standard as I don't think I can make a roller bearing and I don't like the lubrication.
Now ready for final assembly . Hopefully all goes well
Bill
- Attachments
-
- img_0295.jpg (4.16 MiB) Viewed 1447 times
-
- img_0294.jpg (4.51 MiB) Viewed 1447 times