If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!

TZ750 style Rob North frame

All about BMW in racing can be discussed. Sharing of pictures, and other information.
Post Reply
johnlacko
Posts: 71
Joined: Sat Nov 28, 2020 11:40 am
Location: Toms River, New Jersey
Has thanked: 6 times
Been thanked: 4 times
Contact:

TZ750 style Rob North frame

Post by johnlacko »

Does anyone know what became of this Rob North bike? It was sold on eBay back around 2012, and I have not seen any trace of it since. It's one of only two TZ750 style frames that I'm aware of. The other was made for Reg Pridmore's dealership, to be offered as a kit-bike conversion for your BMW, but for whatever reason, only the one was made. It lives down in Australia.
EBE616B9-B458-4F47-8BF5-2F8B4E0B0500.jpeg
3F437AA8-2CA7-470E-96CD-7996C01C94C3.jpeg
5DDCEDDB-E6C7-42CC-A7A6-CDA2B1355442.jpeg
3054210E-927D-4C84-BF20-46F434AE02E2.jpeg

RSEBMW
Posts: 1
Joined: Tue May 18, 2021 3:29 am

Re: TZ750 style Rob North frame

Post by RSEBMW »

Hi, The North frame I have down here in Australia is different to that frame in a few areas. That frame is more like the F750 BMW that Reg raced. The reason I think that North only built one for Reg was that he doesn't do production runs and each is one is normally an improvement on the previous one, no two would be identical.
chasis.jpg
northbike.jpg

johnlacko
Posts: 71
Joined: Sat Nov 28, 2020 11:40 am
Location: Toms River, New Jersey
Has thanked: 6 times
Been thanked: 4 times
Contact:

Re: TZ750 style Rob North frame

Post by johnlacko »

Is this Paul? I ran across the article about your bike on Phil Hall's web page about two years ago. Great story! I had tried to get your contact info from Phil, but nothing seemed to be working on his page to reach him via email. So are you still racing at all, or have you retuned it again for street use?

Post Reply