looking for tips to ease dellorto re-installation and pump setup
Posted: Tue Apr 02, 2019 12:32 pm
Hello all,
I'm ready to reinstall my Dellortos after a complete rebuild and thinking about how much effort was required to get them off the intake tubes and that there has to be a way to get them to slip on a little easier. My thought is to warm up the carb body some with a heat gun. Any input would be appreciated. The other issue is setting up the pumps. I know the suggested output is .5cc per stroke. I've read that you should measure 5cc per twenty strokes which doesn't make any sense to me. Wouldn't it be 10 strokes? 10X0.5=5cc) for ten strokes? Please enlighten me. Warren
I'm ready to reinstall my Dellortos after a complete rebuild and thinking about how much effort was required to get them off the intake tubes and that there has to be a way to get them to slip on a little easier. My thought is to warm up the carb body some with a heat gun. Any input would be appreciated. The other issue is setting up the pumps. I know the suggested output is .5cc per stroke. I've read that you should measure 5cc per twenty strokes which doesn't make any sense to me. Wouldn't it be 10 strokes? 10X0.5=5cc) for ten strokes? Please enlighten me. Warren