By joining you will help ensure that we can continue to provide this service
JOIN HERE!
speedo facia screw
-
- Posts: 56
- Joined: Mon May 15, 2017 7:46 pm
speedo facia screw
One of the two tiny speedo face screws has come out and I would like to locktite it in. It looks like I have to take the whole speedo apart. Is this correct or am I missing a simple solution here?
Thanks in advance.
- schrader7032
- Posts: 9056
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 36 times
Yes, I believe the lens is
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
-
- Posts: 56
- Joined: Mon May 15, 2017 7:46 pm
Speedo repair
The speedo on the R90S is easy to access for a simple job like reinstalling the face screw.
Servicing the internals is a complicated process best left to the pros.
This link http://www.pbase.com/dwerbil/1978_r1007_odometer_repair should help show you the basic disassembly procedures.
Use quality proper sized screwdrivers and it should go smoothly.
Brett
-
- Posts: 56
- Joined: Mon May 15, 2017 7:46 pm
speedo
Thanks for that link. My speedo is off 10-15 mph. When my wife rides with me she screams/hits me because she thinks we are going too fast. Most of the time i am but the speedo being off does not help.
I may go in and try to tune it. Thanks.
chuck