By joining you will help ensure that we can continue to provide this service
JOIN HERE!
Starter Relay Wiring
Starter Relay Wiring
In the attached pic....Pins 86 85 and 87 I can see but...
Are the pins circled in blue called pin 30
Are the pins circled in green called D+
If I have that correct then do I have my wiring colors to pin numbers correct...
D+ connect Blue from Engine Harness and Blue from Main Harness
30 connect Red from Engine Harness and Red from Main Harness
85 connect yellow from Main Harness
86 connect 3 x green from Main Harness
87 connect Black from Engine Harness
Just as extra question for bonus points. These two connects come out of the main harness right next to the Starter relay wires.
Are they the clutch switch wires I have circled in green. Thanks
Richard
- schrader7032
- Posts: 9040
- Joined: Fri Oct 27, 2006 3:00 am
- Location: San Antonio, TX
- Has thanked: 3 times
- Been thanked: 34 times
Re: Starter Relay Wiring
Yes.Are the pins circled in blue called pin 30
Are the pins circled in green called D+
Yes.If I have that correct then do I have my wiring colors to pin numbers correct...
I think they are the wires to the brake fluid reservoir level switch.These two connects come out of the main harness right next to the Starter relay wires.
Are they the clutch switch wires I have circled in green.
'78 R100/7 '69 R69S '52 R25/2
Fast. Neat. Average. Friendly. Good. Good.
Re: Starter Relay Wiring
Thanks for confirming that.
Also yes I think that the extra wire probably are for the brake fluid level.
I dont have the brake system on bike right now so couldn't see where the wire might have gone.
Thanks
Richard