Advice needed removing R69S Terminal Board
Posted: Mon Apr 13, 2009 5:50 pm
I've done this with a couple different buckets. I've never broken off a tab, but there's always a first time. I've used a small pair of needlenose pliers. The tabs are pretty stiff. I only bend them enough to free the board.
You'll want to keep some pressure on the board as you release the last two tabs because the key arrangement is made up of a number of small parts and a STRONG SPRING. You will find hours of entertainment and learn many new words when you go to reinstall.
Take the opportunity to paint the inside of the bucket white. You can't believe how much easier this makes working on things in there, it's not quite such a black hole.
You'll want to keep some pressure on the board as you release the last two tabs because the key arrangement is made up of a number of small parts and a STRONG SPRING. You will find hours of entertainment and learn many new words when you go to reinstall.
Take the opportunity to paint the inside of the bucket white. You can't believe how much easier this makes working on things in there, it's not quite such a black hole.