If you like our site, please consider joining our club!
By joining you will help ensure that we can continue to provide this service
JOIN HERE!

Lens replacement for clock & volt meter

Post Reply
toolmandoug
Posts: 30
Joined: Sat Oct 31, 2015 2:38 pm
Been thanked: 1 time

Lens replacement for clock & volt meter

Post by toolmandoug »

The lens on my clock and volt meter were in tough shape. I could not find replacement lens, so I set out to try to make my own. I used acrylic that was 1/8” thick for the lens. A 2” schedule 40 PVC works perfect for a holding jig. I used the lathe to hold everything tight while rolling the old bezel back on, and finished rolling it on with a blunt brass bar with it resting on my work bench. My jig did not like a lot of side pressure. Tape the lens and a coat of satin and they look like new. I also replaced the capacitor in the clock.
Attachments
847ED45E-EBA2-435E-B5D3-F5A11E9B2FEC.jpeg
2E1DC71A-9647-44B9-A0AB-C7302396F2C0.jpeg
136A531D-BFBD-4501-B9FA-E1337F9FAC12.jpeg
7EDB1BEA-0397-47C7-8BDF-E6C8743249F3.jpeg
958B7315-482D-4EC8-B6F3-08A3B9F0E6B0.jpeg
0C131A20-1125-45C3-B904-B16152E09BA8.jpeg
1D87D9B6-EDC2-491E-A43A-294A33561231.jpeg

Post Reply