By joining you will help ensure that we can continue to provide this service
JOIN HERE!
/2 flywheel bolt
-
- Posts: 288
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 17 times
- Been thanked: 4 times
/2 flywheel bolt
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: /2 flywheel bolt
There are 6.
So you would need an M8 x 1.0 pitch tap.
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York
-
- Posts: 288
- Joined: Fri Oct 27, 2006 3:00 am
- Has thanked: 17 times
- Been thanked: 4 times
Re: /2 flywheel bolt
- jwonder
- Posts: 784
- Joined: Wed Nov 23, 2016 7:50 pm
- Location: Long Island, New York
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: /2 flywheel bolt
I am not sure why you are doing this, but two things I would note:
1) if you do use a tap then I would use a bottoming tap. I would wonder if the threads on the bolt were pulled before the internal thread in the crank.
2) I would use a thread chaser versus a a tap as I would think you would not want to remove any material from the threads.
I would be interested in the reason for the tap for future note.
Hope this helps.
Vice President, Vintage BMW Motorcycle Owners
2022 BMW Friend Of the Marque
Long Island, New York