Vintage BMW Motorcycle Owners

Umm..
Is there a way to know what is shoring all pins together?

ALL screws on this part give me continuity to each other AND to the ground! Including the green wire on top. (photo #1) I can feel it's not a good thing , right? (Positive goes from battery to screw # 30) Which one you mean the lone screw? The voltage regulator is an aftermarket and it looks like th...

Hi Avi.. Yes a 6V 12Ah

Ok I removed the whole wiring from the bike and left it attached only to the circuit in the headlight I found out a short to the ground in the live wire that goes to the brake / plate light assembly and trying to isolate the problem. the original voltage regulator is not there and there was fitted w...

Happily not destroyed . just didn't fit with the o ring on top.. had to pass on that.

Should the green & red wires have connectivity to each other ,and to the ground?

Here are couple of photos for the brushes
I cleaned the rotor also ..

I don't see any change in lights when i rev the engine cause the only light I have is the green light when switch is open . But after a 10 minutes ride at night I start losing the headlight . I get nothing close to 7V unfortunately.
Thanks for the andwer

Would appreciate it a lot if anyone can help me checking what's wrong with my bike : I measured 6.03V the battery when pulled out of circuit and I get the same measure when it's connected I jacked the bike on the center stand and put in gear - no change Still 6.03V and not raising Battery is new (1 ...

Bought the kit from German seller on eBay

What other carburetor could fit in the R51/3 in case I don't find 1/24/139&140 ?