1 reply [Last post]
ocallahan7436
ocallahan7436's picture
 Offline
VBMWMO #7436
Joined: 09/22/2008
Posts: 23

Can somebody post a close up photograph of an R62/52 front licence plate and the mounting brackets?

Darryl.Richman
Darryl.Richman's picture
 Offline
VBMWMO #6285
Surf City, USA (Santa Cruz, CA)
Joined: 10/27/2006
Posts: 2185
R62 licence plate

Here's a photo from the BMW Archives:

[img]http://darryl.crafty-fox.com/mcpics/2004/R52/R52%20Info/00004772_M[1].jpg[/img]

From this (and maybe a couple others), I made this:

I cut the plate from a piece of mild sheet steel with a bandsaw, cleaned it up with a Dremel tool and hand files, then gave it a couple coats of primer, and a top coat of white. After it was fully dry, I made a template for the white area, covered the plate on both sides with masking tape, traced around the template, and carefully cut away the masking tape outside the template. Then I sprayed the plate with black paint. I had the lettering done in vinyl lettering, carefully applied it, and then sprayed the entire thing with clear.

__________________

VBMWMO Webmaster,--Darryl Richman
http://darryl.crafty-fox.com

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.