2 replies [Last post]
bhontz
bhontz's picture
 Offline
Joined: 06/21/2009
Posts: 6

Looking for some help - i'm putting together a R75/5 parts bike. I'm ok with the wiring but I'd like some direction on the correct headlight bucket "holes" to use for passing the speedo cable, tach cable, main harness, front turn signals etc.

This bike was missing some parts and a few of the holes in the bucket were empty, within nothing passing through them.

I've included a photo and I've labeled the holes A - F. If someone would be kind enough to spend ten minutes or so looking at their /5 and then let me know what wires/cables pass through hole A, B ... F, I'd greatly appreciate it!.

Thank you in advance for your assistance.

alex2
alex2's picture
 Offline
Albuquerque, NM
Joined: 07/19/2009
Posts: 1
R75/5 Headlight Bucket "holes"

In case you have not figured it out yet, here the way it was hooked up on my R60/5, before I took it apart:

A + B: Handlebar control switches

C: Turn signals

D: Tach cable

E: Speedo cable

F: Main Harness

Hope that helps...

bhontz
bhontz's picture
 Offline
Joined: 06/21/2009
Posts: 6
R75/5 Headlight Bucket "holes"

Thanks Alex!

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.